4/18/2021 0 Comments Digital Performer Motu
I should point out that I found the LED indicator legend extremely difficult to read if, for example, I needed to check the indicated sample rate.The range now consists of three interfaces, the 2408 Mk3, the 24IO and the HD192, which are all developments of, or replacements for, previous models in the MOTU range.They all connect to the host computer using the same PCI card, the PCI-424, itself a development of the popular PCI-324.Adding more interfaces to a core system is easily achieved, since the PCI-424 has four Audiowire sockets alongside the 9-pin ADAT sync connector, and each socket can host one expansion IO.
Since 24 is the highest number of channels supported by any of the interfaces here, one PCI-424 card could allow up to 96 channels of input and output (IO) via a single PCI slot, at the appropriate sample rate. Furthermore, any combination of four of the interfaces can be connected. Audiowire is MOTUs proprietary audio protocol, which utilises standard 6-pin Firewire cables and connectors. Digital Performer Motu Driver Installation IsDigital Performer Motu Software Installer OnInstalling the card is as simple as for any short-form PCI card, and driver installation is handled by the software installer on the supplied CD. The Windows software and utilities provide most of the functionality available on the Mac, with the exception of the Audiodesk application. As well as the ASIO driver, MOTU also provide a GSIF driver for use with Tascam Gigastudio, and a WDM driver for use with compatible hosts such as Sonar. The numerical designation refers to the fact that it offers 24 channels of simultaneous IO, eight channels of which can be analogue. The Word in socket also doubles as a Video input allowing the interface to resolve directly to a video signal. SPDIF. There is one stereo input and two stereo outputs. The second output simply duplicates the output of the first and allows the connection of a further digital device such as a DAT machine. Digital Performer Motu Code Input AndThese sockets also double as SMPTE timecode input and output, and the second output will still deliver SPDIF digital audio even when SPMTE in and out are required. TDIF connectors. There are three 25-pin D connectors, each of which handles eight channels of digital IO. These share the output with the ADAT optical outputs, although the inputs can only be one or the other. Three pairs of ADAT optical connectors for up to 24 channels of ADAT digital IO. Two rows of eight quarter-inch balanced jack sockets for eight channels of analogue IO. One pair of balanced quarter-inch jack sockets for main output. These duplicate the output of analogue channels 1 and 2, if one of the three eight channel banks into which the 2408 Mk3 is internally divided has analogue selected as the desired format (using the PCI-424 configuration window). At the far left is a headphone jack with its own volume control, next to the main output volume control. Next come three sets of LEDs, which display input and output activity for each channel of the three banks of digital IO. This is handled by five-segment LED meters measuring from -42dB up to 0dB. When the 2408 Mk3 is running under computer control rather than in stand-alone mode, these LEDs also operate as clock source indicators, a mode chosen by pressing the Select button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |